mm 200 drive rolls

admin

I have a mm200 with v grooved .030 drive rolls  and a tweco elimantor set up for .035.  I'm on a bit of a budget and already bought the .035 wire with out looking at my drive rolls.     Can I get by running the 035 with 030 wheels for a bit.
Reply:I have run mine that way by just forgetting to swap them. Do yours not have a second groove on them for .035?
Reply:I'll point out, that a new set of drive rolls is only around $35.ESAB Migmaster 250 Hobart Ironman 230Multimatic 215TWECO Fabricator 181i & 211iHH125EZ - nice little fluxcore only unitMaxstar 150 STH - very nice
Reply:Don't be too afraid to buy used ones either(look at them first) Some folks upgrade to different feeders and may have extras. Or trade somebody here maybe.Arcon Workhorse 300MSPowcon 400SMTPowcon SM400 x 2Powcon SM3001968 SA200 Redface1978 SA250 DieselMiller Super 32P FeederPre 1927 American 14" High Duty LatheK&T Milwaukee 2H Horizontal MillBryan
Reply:Wheels marked .030 on one side and nothing on the other side
Reply:My lws quote me 67 $ for drives
Reply:Originally Posted by large-humanMy lws quote me 67 $ for drives
Reply:Try eBay as well.   Many available.  Should use standard drive rolls.  IIRC, I bought 4 .030/.045 drive rolls with guides for around $20.TA Arcmaster 300CM3XMT 304S22P12 suitcase feederX-Treme 12VSOptima pulserTA161SMaxstar 150STLHypertherm PM45OP setupStihl 020AVP, 039, 066 Magnum
Reply:Originally Posted by large-humanMy lws quote me 67 $ for drives
Reply:What's .005” between friends? Just take a 36” pipe wrench and tighten the wire tension down, and you'll be good to go! Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:Originally Posted by CEPJust take a 36” pipe wrench and tighten the wire tension down, and you'll be good to go!
Reply:Do you have the rolls with the 3 slots (quick change ) or the 3 holes (old style) ? If you have the quick change style PM me an address and I can mail you a used set .Miller xmt304,  Miller S22 p12, Miier Maxstar SD, Miller 252 w 30A, Miller super32p12, Lincoln Ranger 9, Thermal Arc 181I with spoolgun, Hypertherm 10000 ,Smith torches. Esab 161lts miniarc.
Reply:Originally Posted by DanCyberweld has them for $36 with free shipping.http://store.cyberweld.com/drrokitvgr2r.html
Reply:Mjd I have the 3hole ones.  I greatly apreciate the offer.  Just trying to get this thing up and welding   still need to get a hood and a flowmeter yet
Reply:Originally Posted by large-humanMjd I have the 3hole ones.  I greatly apreciate the offer.  Just trying to get this thing up and welding   still need to get a hood and a flowmeter yet
Reply:Black panel but has the old style power switch not the wide newer style