what to expect when i test for an ASME B 31.1 test?

admin

hey guys and gals, I have a test to do a job for some low pressure steam lines for a boiler/ chiller job and I have to take a test this week.  what test procedure should I expect to see?  I just thought it would be 6" test but I may be wrong.... any help would be appreciated! thanks guys!SnailHouse_Projects--For All Your Turbo and Off-Road Needs Import and DomesticMiller Dynasty 200Miller Syncrowave 250Miller 251Lincoln 250'69 Lincoln SA-200 MILLER KILLER!Thermal Dynamics PlasmaPakmaster 100XL
Reply:I've taken two tests for the same type job. Usually 2" sch 80 tig root, tig out and 2" sch 160 stick root, stick out. Sent from my DROID RAZR using TapatalkLong after the price is forgotten, the quality will remain.Both of my Poppy's 1954 Short Hoods -Third generation to weld with it and teaching a fourthSA 2## - Bought and sold more than I can remember or care to list, 8 in the shop right now
Reply:Adam Arc, is that generally 6-G, or 5-G?Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:6G, I've never taken any other position for a pipe job.Sent from my DROID RAZR using TapatalkLast edited by Adam Arc; 02-04-2014 at 08:29 PM.Long after the price is forgotten, the quality will remain.Both of my Poppy's 1954 Short Hoods -Third generation to weld with it and teaching a fourthSA 2## - Bought and sold more than I can remember or care to list, 8 in the shop right now
Reply:Thank you sir for the reply! Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:from what im told the job is only going to be stick, would I still have to take the tig 6g? trying to gather info from this guy is hard, and I remember him asking me if I could knock out 6" for the test... does this sound right?  I know I can pass the combo test, I guess I don't want to go in there expecting a 6" test and then be handed some 2" sch 120 or 160....thanks for the replys!SnailHouse_Projects--For All Your Turbo and Off-Road Needs Import and DomesticMiller Dynasty 200Miller Syncrowave 250Miller 251Lincoln 250'69 Lincoln SA-200 MILLER KILLER!Thermal Dynamics PlasmaPakmaster 100XL
Reply:Just fake it til you make it.Sent from my DROID RAZR using TapatalkLong after the price is forgotten, the quality will remain.Both of my Poppy's 1954 Short Hoods -Third generation to weld with it and teaching a fourthSA 2## - Bought and sold more than I can remember or care to list, 8 in the shop right now
Reply:Originally Posted by Adam ArcJust fake it til you make it.