Here's a table I built.

admin

A table I built a few months ago. It is the legs 14gx2"sq with. It is moved by extending the two middle wheels, thus raising the table. The tee handle under the table is used for raising the lowering the wheels.   I then teeter/balance it around the shop.  It is easy to move, raise and steer.    The front wheel does nothing, since it is a swivel wheel.  When the front wheel is oriented to roll it is too close to the floor.don't know why stuff is sideways? Attached Images
Reply:Very unique design on the lifting wheels I think that will be copied by other.ThanksTomDIY CNC Plasma table USB BOB Price THCHypertherm 65Everlast PowerTig 255 EXTMiler 180 Mig13" metal latheMill/ DrillECT, ECT,
Reply:That will be around for a long time. Great lookin' (and functional too) table.If you don't want to stand behind our Troops, feel free to stand in front of them.
Reply:Thanks guys.
Reply:Good build. Better design! That's really smart to do it that way.
Reply:How long it take to drill all the holes?
Reply:I started drilling holes and had somebody else finish. Total about 3 hours with a mag drill and a 5/8" cutter.  Thanks
Reply:Great design and build! A sturdy metal working table. Should serve you well. Good job.PlasmaCam CNC cutterLathe and Band SawClamps
Reply:Thanks guys. I initially designed the wheels  to sit slightly off center,  so when the table is lifted it would rest on the swivel. That table specifically fabbed for making tables.
Reply:Nice!
Reply:Wow, cleaver design.