I've had this saw for about 8 years now and has served me very well till recently. It is the old 4x6 model with the thick cast guides and recently the blade has been walking off the idler bearing and jamming up in between the guide and bearing. its driving me up the wall why its doing this! it wastes the blade everytime. Ive tried all the adjustment i know. Soon as i kick the saw on it just sucks the blade right up to the idler guide and deflects off the bearing and the blade just kinks in half this is the guide farthest from the motor with the adjustable roller guides I think it is a old harbor freight model. any thoughts?
Reply:http://groups.yahoo.com/group/4x6bandsaw/ try this group got good stuff on it.
发表于 2021-8-31 22:24:46