A new addition to the family

admin

I just ordered an Invertec V350 Pro Factory version.  5 to 425 amps CV and CC.  6 and 14 pin remote connectors.  Single or 3 phase, NOT derated for single phase.  Only draws a max of 85 amps.CC soft for 7018CC crisp for 6010 (which I rarely use)GMAW soft for bare wireFlux core CrispLift TigDigital amp and volt meter.Adjustable arc force and inductance.Gouges with up to a 5/16 carbon.I already have the 6 pin lincoln foot pedal for my ranger 250.Can't wait!DavidReal world weldin.  When I grow up I want to be a tig weldor.
Reply:Damn david.  Let us know how it works out.  Congrats.Various GrindersVictor Journeyman torch200cf Acet. 250cf oxygenLincoln 175 plus/alpha2 gunLincoln v205t tigLincoln 350mpEsab 650 plasmaWhen you can get up in the morning, Its a good day.Live each day like its your last.
Reply:Lucky you.........._________________Chris
Reply:Must be nice to have the big cake to order that !  John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:I just finished a BIG job that I did outside.  Last week I was driving out there and it was 13 degrees.  I quit at noon.   Nice to finish the job in 40 to 50 degree weather.  Especially to apply the cold galv.For the last 20 years all I had was a Lincoln G7 weldmanpower 225 for stick welding and gouging.  Everytime I needed to stick weld in the shop, I woul fire it up.  Now I have a shop welder for stick and gouging.  I am also buying a second LN-25 from my dad.  The invertec and LN-25 will pretty much replace my wirematic 250 except for spool gun use.  Next is a LN-7 or LF-72I have a garage and welding business.  Welding pays better with less hassle.  If I can find enough work, the garage will be closed.This should weld as smooth as my ranger 250.  Chopper technology.  Yeah, I am fired up.Last edited by David R; 03-13-2007 at 06:29 PM.
Reply:congrats take some pic's and show usChuckASME Pressure Vessel welder
Reply:that's supposed to be a fine machine  congrats!Idealarc 300\300 TIG AC\DC
Reply:This should weld as smooth as my ranger 250. Chopper technology.I bet it's one step above. I owned a Ranger 305G and 300 Powermig, buta great inverter is a step above. BB396 has a Invertec 350 advance processmachine and a Powermig 300 and he really likes his Invertec the best. Not that he does not like the Powermig 300 real well too. I will be interested in what you think about the Invertec. I ran my ranger with a GMA-LN9 feeder too.
Reply:As far as I am concerened, the ranger 250 has an inverter in it too.  It welds at 19 to 20 KHz DC.  I checked it with an Oscope.   The arc force knob changes the frequency and ON time.  It took me a long time to figure out that one.Its going to be a while before I have the machine in my hands.  Its ordered, but I am waiting for that big check to show up so I can pay for the new machine and buy some leads......Friday I was welding 1/8 7018 overhead and horizantal with the rangere 250.  The bead appearence impressed me.  Never saw anything so smooth.  I will post pics of beads when the machine shows up.  I bought 100 lbs of flat stock just to play with.   Once its here and I am used to it, I am taking my 3G and 4G 70 series AWS test.David
Reply:What happened to this thread?No pics?Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain