5'x11' welding table in 4 hrs.

admin

Had another weldor wanting a table. He precut the channel and his legs and showed up after hours yesterday so we could build it on my 1" plate table. Four hours later and we were done. I first saw this type table on here but I can't remember who posted it but it makes a very good and relatively cheap table. With this style you can put a clamp any where on the table. This is the fifth table of this design that has been built on top of my table. Attached Images
Reply:5x11 is a great size. how tall did you make it? looks great!
Reply:What is that Chanel iron  welded face down  for the top? real heavy looking legs ! looks like it will work good ,and if a piece of the top is messed up grind it loose and replace with out to much expense .What is the spacing between slats and what size C chanel ?I like it!!gxbxcLast edited by gxbxc; 08-23-2014 at 01:20 PM.
Reply:Originally Posted by BobHad another weldor wanting a table. He precut the channel and his legs and showed up after hours yesterday so we could build it on my 1" plate table. Four hours later and we were done. I first saw this type table on here but I can't remember who posted it but it makes a very good and relatively cheap table. With this style you can put a clamp any where on the table. This is the fifth table of this design that has been built on top of my table.
Reply:This table uses some very heavy I beam that the guy got off a job. It's 10" with a half inch web. The top is 6" channel on a 2" spacing. The guy that shares my shop built one last year and it is great for railings and such.