Need to Replace Muffler

admin

How do you go about getting muffler unscrewed from exhaust manifold? It is rusted out and just setting on there. Also where do you get upper and lower water hoses can you find them at auto store under something else?1990 SA 200Miller 225  Rip Miller302Miller 135Lincoln 200 MigHypertherm 600 PlasmaPlasma Cam Cutting TableMikita Cold SawJL Welding Tx . com
Reply:JL, it might help if we knew what machine you were working on?I'm a Lover, Fighter, Wild horse Rider, and a pretty good welding man......
Reply:Sorry about that,SA 200. Also what do you think about a full synthetic like Amsoil 10 - 30Last edited by JLWelding; 06-01-2009 at 10:16 PM.1990 SA 200Miller 225  Rip Miller302Miller 135Lincoln 200 MigHypertherm 600 PlasmaPlasma Cam Cutting TableMikita Cold SawJL Welding Tx . com
Reply:These are #'s taken from the AWS Forum and I believe there is a sticky here under Lincoln with most of the same info. These fit both the F-162 or F-163, upper hose Gates # 20606, lower hose Gates # 20705. Fan belt NAPA # 5L480W, oil filter Fram # PB50, NAPA 1050, Baldwin #B50, WIX # 51050. Oil pan gasket set, Victor OS20509, Fel Pro OS30236. Front cover gasket including front seal, Victor JU894, Fel Pro TCS54182. I have NOT bought any of these, just copied the #'s, so they are unverfied by me. NAPA doesn't carry anything for the SA 200 according to the local store (he couldn't find anything in his book) but I didn't have these #'s yet, when I went to the store. Hope this helps some, a phone call should verify availability and what they will fit. Synthetic oil is a personal preference, you'll have to decide that for yourself.Last edited by gizzardgutz; 06-02-2009 at 12:32 AM.Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.                                         -Cree Indian ProverbSA 200 LincolnVictor Torches
Reply:[QUOTE=JLWelding;286508]How do you go about getting muffler unscrewed from exhaust manifold?...[QUOTE]A lot of heat, or wake up Castweld. Castweld was last seen demonstrating a slick manifold surgery at post #12, here: http://weldingweb.com/vbb/showthread.php...528#post286528Good LuckLast edited by denrep; 06-02-2009 at 01:03 AM.
Reply:Lincoln Hoses found on eBay..http://cgi.ebay.com/ws/eBayISAPI.dll...m=260420982559Or on website..www.stumpfweldingsupplies.com/200parts.html
Reply:Thanks for those numbers thats a big help. Ebay not to much help called Airgas and they are 8.95 more there than ebay buy it now. 50.00 something for hoses can you belive it?1990 SA 200Miller 225  Rip Miller302Miller 135Lincoln 200 MigHypertherm 600 PlasmaPlasma Cam Cutting TableMikita Cold SawJL Welding Tx . com
Reply:http://cgi.ebay.com/Lincoln-SA-200-F...3A2%7C294%3A50here's some for alittle less. I took my hoses into the local mom and pop auto parts house and was able to match some up. I don't rember what i paid, but don't believe I had 50 bucks in themHillbilly Fabworks