MM350p (good deal?)

admin

New guy here. Saw this on craigslist. Am going to go get it tommorrow if yall think its a good deal.http://gadsden.craigslist.org/tls/4563094487.htmlIt is a mm350p. unkown age. only comes with the gun, lead, machine, and whatever wire is in it. no bottle. $1750 Plus the 10gallons of gas for the drive.supposedly it works and we are going to fire it up before i give him the cash. So is it a good deal?let me know so i dont waste my time and money.
Reply:Get the serial number off it and you can find out how old it is.I forget the sequence but you can find out how many arcs there has been with the buttons as wellMiller 350PMiller 30AHobart trekHTP Invertig 221
Reply:Good deal if it's in good working order and isn't on its last leg.   Like previously stated, check arc starts and year from SN.  Miller website has a quick reference for year based on SN
Reply:Yeah it's a good deal if it is working. Hold the setup and arc buttons at same time for hrs and starts.  Rotate left knob to change infoTiger Sales:  AHP Distributor    www.tigersalesco.comAHP200x; AHP 160ST; MM350P,  Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma.  For Sale:  Cobra Mig 250 w/ Push-pull gun.  Lincoln Wirematic 250
Reply:Originally Posted by soutthpawYeah it's a good deal if it is working. Hold the setup and arc buttons at same time for hrs and starts.  Rotate left knob to change info
Reply:I chickened out. Am going new from lws for future support if needed.
Reply:Hours can't always be trusted.    Data can be reset.   My 350 apparently reset the hours and arcs with the addition of the pulse board.     So if a board has been replaced is possible the hours are not originalTiger Sales:  AHP Distributor    www.tigersalesco.comAHP200x; AHP 160ST; MM350P,  Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma.  For Sale:  Cobra Mig 250 w/ Push-pull gun.  Lincoln Wirematic 250