Speedglas !!!

admin

It looks as though 3M has redesigned the some of the Speedglas line which looks to be positive.http://solutions.3m.com/wps/portal/3...m/SGTransitionI.B.E.W Electrician and Damn Proud of It !!!! .Virtus Junxit Mors Non Separabit http://www.shrinershospitalsforchildren.org/
Reply:I've had my 9100X for almost three years now.  I had no idea how new it was when i got it.  I have nothing bad to say about the helmet at all.  The new headgear system is miles above anything else I've worn.  My only complaint thus far is that it can be a real pain to find lenses etc. at the LWS and most shops I've been at don't have them either so you'll be buying your own.  I'm really happy with the shield and any time I've had any problems the customer service at 3M has been top notch.  I needed a replacement part and they had it out by courier next day.
Reply:Originally Posted by MartiniI've had my 9100X for almost three years now.  I had no idea how new it was when i got it.  I have nothing bad to say about the helmet at all.  The new headgear system is miles above anything else I've worn.  My only complaint thus far is that it can be a real pain to find lenses etc. at the LWS and most shops I've been at don't have them either so you'll be buying your own.  I'm really happy with the shield and any time I've had any problems the customer service at 3M has been top notch.  I needed a replacement part and they had it out by courier next day.
Reply:Wish 3m was like a car lot... trade in your old speedglassMiller Dynasty 200DXMiller Spectrum 250DMiller Millermatic 200Bunch of old blue dinosaurs....
Reply:hmmm....I wonder if they'll be more expensive than what they are now?...Bend over! Miller Dynasty 200Millermatic 211Instagram?.... find me @ WELD_MEDIC
Reply:I like em. HammerFile Big Hammer------------------------------Here, let me Google that for you...
Reply:Good to see they went for a clear grinding lense option. Lenses I get on-line, I don't even bother asking around.City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:I like mine except for the fact I have to turn it on if I let it sit for more than 30 minutes. I've flashed myself  a few times. haha
Reply:Hey Lamename,do any micro-tig?
Reply:Lame name, why the microscope?Miller diversion 165Miller mig 211Hypertherm pm 30Milwaukee 6230 14 inch chop sawMd 45 mag drill (RIP; fell on its head)New MD 45! Thanks to the esposa!Finally got an O/A setup
Reply:Originally Posted by [email protected] name, why the microscope?
Reply:Originally Posted by grumpycricketHey Lamename,do any micro-tig?
Reply:Hello Lamename,I was researching helmets when I read that you were building a Micro Tig.  I build and repair lots of small stuff and being able to Micro Tig would be the “cat’s pajamas”.  I’ve seen jewelry repair as well as eyeglasses done that way.   Any  suggestions?  Is a microscope a requirement?
Reply:I'm not an expert in micro welding. I'd ask some of the old die repair guys. I just like to build shtuff.HammerFile Big Hammer------------------------------Here, let me Google that for you...
Reply:i bought a 9001xx had it for 6 months picked it up yesterday outta my box and it had a huge crack in it, outta no where.
Reply:Yeah and I am sure no one in the shop knows how that happened! I have had 1/2 breaker bars destroyed, but no one in the shop knows how that happened........they sure didn't do it. I'm thinking maybe the Keebler Elves come in at night and break Sh*$. "Anybody can talk $h!t behind a monitor, I let the quality of my work speak for itself"Lincoln Square Wave 255 and 355 Tig Lincoln 255 Power-Mig w/ spool gun Koike 5 x 10 CNC plasma Hyd-Mech DM-10 bandsaw Ineco QB-76 NC tube bender
Reply:I have the 3m speedglass with the integrated hart hat and clear grinder screen and fresh air supply.it's some of the best money I have ever spent.Miller TrailBlazer 301Miller 12rc feederMiller ShopmasterMiller 22a feederPlasmaCam CNC TableHypertherm 45 cutterDrills, saws, blast cabinets etc.
Reply:My only regreat after having a speedglas tri-view for 4 years is that I didn't hold out for the style with a built in air supply or respirator.