Chicken feeder that shouldn't flip

admin

Made this little feeder today for my chickens. It is 1/4 inch and shouldn't flip or I will be surprised. The bottom is a little more then 1/4 inch. And I was playing with 3/32 filler rod I usually use 1/16. Cut the pieces with a 4.5 inch grinder and a cutoff wheel
Reply:
Reply:3/32 tungsten
Reply:Just what every chicken needs!!Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Attachment 928491
Reply:Attachment 928511and the final product besides I need to buy some clear paint
Reply:Originally Posted by AKweldshopJust what every chicken needs!!
Reply:Those are chicken crap welds to btw way...Or they will be pretty soon! Haha.Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Are you saying the welds don't look good?
Reply:Originally Posted by motolife313Are you saying the welds don't look good?
Reply:That's like making pretty welds on a farmers manure spreader.....Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:It was also practice. This chicken deserves it anyway! She lays a chicken everyday. I had 4 more but somthing kept getting them. And I always eat the eggs raw. I mix them in my protein shakes. I've probley ate 500 raw eggs and cooked 10 if that