Miller Econotwin HF tig/stick

admin

Upgrading to a smaller but more powerful welder and i'm going to post this up here and see if there is any interest. Miller Econotwin HF, tig and stick leads, performs VERY well in both modes. This is an AC/DC machine, it does not have a remote control for amperage but you can add a remote for the HF or it can be on constant. I don't do much aluminum welding, but I have fired it up on some and it surprisingly performs well in HF AC mode. As for DC welding it is scratch start, or HF start if you purchase the remote from arc zone. I have done lots of steel and stainless welds with this and have honestly been quite happy with it, it's a superb stick welder too. pounds of 7018/24, 6010/13 and certainium 747 rods have been run through it and comes out great.You can try all features of the welder if you are interested. I have plenty of scarp to try it on, has filler rod storage, 50' power cord, and new bottle rack on the back, bottle NOT included.Asking 600 o.b.o, shipping, doubtful, this is a HEAVY girl.ESAB MigMaster 275Miller Econotwin HFMiller Syncrowave 250
Reply:Were r u located
Reply:Originally Posted by Liljerry564Were r u located