|
|
This is a pair of 14 gauge steel cabinets I made they are used to store liquor The doors are 93'' tall and 40 ''. The cabinet in the middle is three smaller cabinets that I stacked and bolted together they are imported My client had picked them up before they contacted me.Last edited by DGM; 02-18-2015 at 09:16 PM.
Reply:Any pictures of the build?Lincoln Pro Mig 180Lincoln Pro Core 125Hypertherm 30xpPorter Cable Drill PressAcra 7x12 bandsaw48" sheet metal brakeCrap load of other tools, working on metal now.
Reply:DGMThe locks and the hangers are 'sloppy/junk'.'Otherwise' - this is a great composition.OpuspsYou need to:Note: [that] the welders are in the background . . .
Reply:The locks on the center cabinet were added by the owner later there was a valance I made to cover the door hardwarebut the owner wanted to see the hardware.
Reply:Originally Posted by OPUS FERRODGMThe locks and the hangers are 'sloppy/junk'.'Otherwise' - this is a great composition.OpuspsYou need to:Note: [that] the welders are in the background . . .
Reply:I like them, Its the style I would put in my house if my wife would let me. lol
Reply:They look neat. Well done.*************************************Mike AccardiHenderson, [email protected] 250XLincoln Weldpack HDMiller Syncrowave 180 SD************************************* |
|
发表于 2021-8-31 22:09:29