Tig rig bottle hanger

admin

I am looking for ideas on a setup to hang my tig rig on a argon bottle. I havnt seen anyone post them up before, and I am tired of throwing my tig rig in my bag, especially now that I am gonna be running 50+ feet of argon line.Miller Maxstar 200 SDPiperliner #10 Gold
Reply:I hang mine on the bottle, the regulator holds it in place.But I did see a guy who made a clamp around his tank that had hooks welded to it - pretty simple looking.Dave J.Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~ Syncro 350Invertec v250-sThermal Arc 161 and 300MM210DialarcTried being normal once, didn't take....I think it was a Tuesday.
Reply:This is a TIG caddy that I made it is made with aluminum pipe but I also make them from 1/2" square tube
Reply:Originally Posted by skipweidnerThis is a TIG caddy that I made it is made with aluminum pipe but I also make them from 1/2" square tube
Reply:we used to make those with stainless tubing scammed from the instrument hands.
Reply:I like that designMiller Maxstar 200 SDPiperliner #10 Gold
Reply:That'sa bout good as it gets. Just lift it all off and tote away and drop on next bottle of gas.