FS: Stainless Steel Pre Bent 3" Tubing

admin

We have about 19 tubes Pre Bent up for grabs. It's 304 Non Magnetic Stainless Steel .065 wall 3" OD Most of the Bends Fall Between a 30 Degree bend to a 40 degree Bend. Some are close to 50 degree. Make a Offer on just one or two or The whole lot of them. Willing to ship them at purchasers expense. (I can quote you shipping coast through UPS Ground just provide a street Address and Zip / state) ( I know I'm new here but I work for a reputable Company not some hole in the wall place)
Reply:For the Future, We will have 90* Bends Pre cut in 3" and 2 &1/2" stainless steel. If there is a large enough interest in that of course.
Reply:bump.
Reply:Bump for Cobb, they are a great company. Had a few of their parts on my old STi.
Reply:Thanks  Man a lot of COBB fans on here!
Reply:have any been sold yet and what is the bottom line on some.Thanks
Reply:Nope I still have them all up for grabs. What do you mean "bottom line"?
Reply:He means your bottom dollar/cheapest you will let them go for.PM you.Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:Looking for $12 each tube , Or Best Offer.
Reply:If you want the Tubes shipped to you, keep in mind Each one has a weight of 10 Pounds. So Shipping could add up in Coast Rather Quick.
Reply:Still have a Bunch for sale, shoot me any offers.Willing to cut out the Bends without the Straights to Save on weight / shipping coast.
Reply:WHOA! This is what I'm looking for to fab an exhaust for my mazdaspeed3 (if I could afford yours, I'd buy it!)  looking for as close to 45* bends as you've got in there......I'm sure you're very familiar with the routing of the 07-09 speed3's, so you know the bends I need.Anything close to 90* in there?Hobart EZ-Tig newbie.
Reply:The closest thing to a 90* I have in that pile is like a 60* maybe a 70*
Reply:hm. ok. How bout $25 for 3 tubes with as close to 45* as you can get, to start?Hobart EZ-Tig newbie.
Reply:you want the full tubes? or just the bends.Ill also need a zip code well address to get you a shipping quote as well.