Any inside pics of Lincwelder 225/3-AS

admin

Hope all is well with everyone, I picked up a Lincwelder 225 DC / 3-AS with an Onan  motor over the Easter weekend and have been trying to figure out the wiring diagram I got from Lincoln.( Thanks for the help on that CCAWGC ) My real problem of course is, ME. I don't comptetely understand wiring to begin with. I did how ever get the Onan to fire up and run by poken' and hopen' the wires direct from the batteries. It smoked a tad and spit a little oil at first. Then calmed down and ran clean. I looked through the posts and have seen a few running and comptetley apart. But I'm looking for some pics with just the skins off with the switch wiring , the solenoid, how the batts are hooked up, etc. When I picked up the welder , it had all the lighter gauge wiring removed. Any help is very mutch appretiated. Code 6630 / Onan 16hp ccka-s / 16270. Thanks guys