I've Just finished my new tig machine and I would like to know how much water pressure the little hoses On the torch will work well at. For the present I am using my household water supply and it is about 70 lbs per square inch. so I bought a water regulator. Usually I just go by trial and error but the new torch and hose I do not want to replace or repair. Mac
Reply:Originally Posted by Tool MakerI've Just finished my new tig machine and I would like to know how much water pressure the little hoses On the torch will work well at. For the present I am using my household water supply and it is about 70 lbs per square inch. so I bought a water regulator. Usually I just go by trial and error but the new torch and hose I do not want to replace or repair. Mac
Reply:Thank You Foxhire. That is good working information. I should be able to work with that. Mac
发表于 2021-8-31 22:07:19