Lincoln DC 250 MK Arc Welder

admin

This is for sale from a local Pawn Shop....can anyone tell me if these machines are 3phase or did they also come single phase?Thankls
Reply:was a thread about a DC 250 a few days ago you can go to lincoln's site and read the manual to find more about that machine  try this   http://www.lincolnelectric.com/Assest...OLN3/IM341.pdf BAD LINK sorryLast edited by prop-doctor; 09-22-2011 at 12:50 PM.idealarc 250/250 ac-dc tigidealarc 250/250 ac-dc tig #2 used for sticklincoln sp100hh125dual arbor grinder polisher30 yrs of hand tools52 pitch blocks 6p-26prake gauge -pitch gaugeG&D prop repair 918-207-6938Hulbert,okla 74441
Reply:Tried that link...only get "Bad Request"
Reply:ok go to www.lincolnelectric.com   you can search for said machine under support, click operator manuals, then product click it an scroll down to find your machine  manual is IM341 wrong manual number should be  IM 132Last edited by prop-doctor; 09-22-2011 at 01:24 PM.idealarc 250/250 ac-dc tigidealarc 250/250 ac-dc tig #2 used for sticklincoln sp100hh125dual arbor grinder polisher30 yrs of hand tools52 pitch blocks 6p-26prake gauge -pitch gaugeG&D prop repair 918-207-6938Hulbert,okla 74441
Reply:Read the manual on line....It says to check the name plate on the welder.  Unfortunately the photo posted on eBay isn't clear enough to read. I may have to take a trip down there, but I fear it is 3 phase, as there is another very similar welder up for sale that definitely says 3 phase.
Reply:really need the code number to find the right manual sorryidealarc 250/250 ac-dc tigidealarc 250/250 ac-dc tig #2 used for sticklincoln sp100hh125dual arbor grinder polisher30 yrs of hand tools52 pitch blocks 6p-26prake gauge -pitch gaugeG&D prop repair 918-207-6938Hulbert,okla 74441
Reply:yep it 3 phase  and a  oldie an AC motor driven machineidealarc 250/250 ac-dc tigidealarc 250/250 ac-dc tig #2 used for sticklincoln sp100hh125dual arbor grinder polisher30 yrs of hand tools52 pitch blocks 6p-26prake gauge -pitch gaugeG&D prop repair 918-207-6938Hulbert,okla 74441
Reply:hey prop doctor when posting a link that goes to a PDF grab the link from the top site going to the PDF. To do this right click the link and hit copy link locations. Thats how I have had luck posting links to PDF's.http://www.leap.cc/cms/index.php