does any one have a good pic of the front of one and i was told they are great welders thinking of buying a used one but i cant read the front panel cause all the crap on it and would like to know what everyone thinks about them good or bad and does it have a continuous full-range adjustment of voltage and wire feed or is a select like a b c d/ 1 2 3 4 or does it matter on the model like some lincolns thanksjason
Reply:Pretty sure the 210 is a tapped machine and the 251 is infinite adjustments. That's the sum total of my personal knowledge on the two. http://www.millerwelds.com/products/...llermatic_210/http://www.millerwelds.com/products/...llermatic_251/
Reply:You can go to Miller and open the actual owners manual that will show the machine like I think you want to see it. I am running the millermatic 185 which is now the 210. I LOVE it. I Have been running the crap out of it for about 8 years.Yes I can tack it for you. I know that won't hold but that is what you asked me to do. Millermatic 350P XR Aluma-Pro push/pullMillermatic 185/spool gunMiller Dialarc 250 HF Water cooledThermal Dynamics Plasma
发表于 2021-8-31 22:04:40