Tips for Purox torch

admin

Does anyone know if cutting or welding tips are still being made tofit my discontinued Metalmaster torch? I think the same tips werealso used on a different Purox torch handle. I have torch handle-WH-4200 and cutting attachment CA-4200Miller a/c-d/c Thunderbolt XLMillermatic 180 Purox O/ASmith Littletorch O/AHobart Champion Elite
Reply:find the manual on the ESAB web site and google the part numbers of the tips you want to buy. You will be surprised I think. When I had a Purox torch set, I was able to find welding/heating tips, cutting tips and scarfing tips for my W-300/W400 torch handle with cutting head. I actually found parts on Amazon pretty easily. ATL welding supply and Weldingsupply.com were both good too.Miller Multimatic 255
Reply:For example the 1.5 inch cutting head is part number 16K10. Google that part number and lots of options come up.https://manualzz.com/doc/en/5637319/...-ca-1500-cutti...Miller Multimatic 255
Reply:Good tip - replace it with a Victor.
Reply:Thanks.I do actually have the manual that came with my torch.I see there are quite a few tips available at some on-line welding supply places I’d never heard of. I wonder if this is NOS or if theyare still being made.Miller a/c-d/c Thunderbolt XLMillermatic 180 Purox O/ASmith Littletorch O/AHobart Champion Elite
Reply:Dunno...grab them while you can I guess.
Reply:That’s what I’m thinking. I bought a couple 16k10 already.Have only the one 9A welding tip that came with set. MaybeI’d buy extra 9A, possibly other size welding and cutting tips.If I knew parts we’re still in production, I’d wait until I needed them.Miller a/c-d/c Thunderbolt XLMillermatic 180 Purox O/ASmith Littletorch O/AHobart Champion Elite
Reply:They are at my local welding supply Middlesex Gas, somehow we have a couple of these torches still in service. Don’t know about welding tips (we only use cutting tips) but they had an assortment in stock last time I was there  (probably just for us).