Another cheap welding cart (with pics)

admin

This is my welding cart for my old Lincoln Electric welding machine







This is blue Miller... it is ironic i know, but i like the color



Last edited by gzm.pepe; 08-18-2011 at 07:55 PM.
Reply:Nice job, I've thought of using an old dolly I have to make a cart for my oxy/propane setup. As short as the machine is, I'd consider a shelf or bin above it.  Again, good job!Lincoln Pro Mig 180Everlast PowerARC 200


Reply:I own a small inverter welding machine and it is light enough to grab it and place it wherever it feels comfortable. Usually on top of the welding table or just on the floor. The only reason I may want a welding cart for it is to have it out of the table and at arms reach for adjusting it without having to kneel down.On the other hand if I had a transformer based welder i would surely make one like yours for moving it arround! Good job! As stevenstilts said, you may want to put a shelf above it for storing consumables, the chipping hamer, brush and such.Mikel
Reply:I like this idea considering I have to lug my HH187 up and down stairs.
Reply:Thanks for comments guys...I learned to weld with this Lincoln, but I plan to buy a bigger MIG machine to improve my work, when I buy lt, i will make a cart more "sopisticated", I already have the idea, when I will do it i will gladly share with you.sorry for my bad english guys, I prefer the spanish of course, but the english online comunity it's bigest

here is my Lincoln machine in



Last edited by gzm.pepe; 08-20-2011 at 12:40 AM.
Reply:Your English is great. I've seen much worse on here by native speakers!!!!Muy bueno cart too! Needs a cerveza holder!  


200amp Air Liquide MIG, Hypertherm Plasma, Harris torches, Optrel helmet, Makita angle grinders, Pre-China Delta chop saw and belt sander, Miller leathers, shop made jigs etc, North- welders backpack.
Reply:Thank you bert
Reply:I like it man, you've just made the classic dolly design a lot better!! But Ive never seen a lincoln quite like that one...[Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:

Originally Posted by Lanse

I like it man, you've just made the classic dolly design a lot better!! But Ive never seen a lincoln quite like that one...
Reply:Lincoln welder on a Miller cart.

It looks good.  Handy and useful.
Reply:yah , im not seeing any tombstones in ther Sandy....wata trip.!http://www.lincolnelectric.com.mx/        thermal arc 252i  -  millermatic 350P -   miller XMT, cp300ts, 30a 22a feeders, buttload of other millers, handfull of lincolns, couple of esabs  -   Hypertherm 1250 G3
Reply:Great another spammer
Reply:gzm.pepe   great job on your cart and your welds look great also!lincoln 125spdayton 250 ac/dcmiller 211 w/spool gunahp  200 sx tiglotos ltp5000dkubota b3200 FEL BHof course duramax diesel
Reply:I agree, poster case for good simple work.  It does need a bucket bracketed to it above the machine.Last edited by Sberry; 2 Days Ago at 12:01 PM.www.urkafarms.com
Reply:

Originally Posted by Woznme

Great another spammer