Bumper pull trailer

admin

I posted this on Miller, I am going to be a little lazy and copy some. I am wanting to do a bumper pull too and was looking for ideas. I want to use mobile frames, I was really looking for ideas on tilt. I am trying to come up with 82 between the fenders. I wanna be able to haul full size pickup.  We got some real genius types here, figured they couldnt wait to come up with cool ideas,,, maybe the genius types are on another forum?I am looking at somethinmg creative I spose. I am trying to come up with tilt at max width to get full size pu on. I could go over the top. I was going to use mobile beams, they are about 10 tall. I wanted to uyse them between the wheels but not sure if I can get it wide enough. By putting cross memembers at the bottom would or could have drive between rails.Yes, I have beuilt several trailers too but not car hauler types and working out the width here is a challenge. A bit the same for the hinge geometry if I want to make a tilt.I built a lot of stuff and still dont have a common tandem car trailer. rebuilt one a whiole back and my buds kid took off with it so it left the neighborhood and I want one at hand for rescue. Local I can call a tow but I am getting some out of town stuff and wouldnt mind being able to go to the steel yard with a pull type 20 ft.I am not really good enough engineer to get the tilt correct first try and the details are so slow to design. I almost bought a used one the other day but it needed just a little work I wasnt wanting to do.I have most materials except for new tires. If it wasnt for that would buy and secondly If we built could do something a bit more advanced.www.urkafarms.com
Reply:look around for plans on the net...you can find them for less than the price of a new tire  and all the engineering is done...  or go to a local trailer lot that sells them when they are closed and get your dimensions .john