Hey guys I could use some help if at all possible.I've looked all over but cant really find any answers to what Im looking for. I just bought a used xtreme 12vs and Im trying to run it off of my bobcat 225. Problem is Ive got the little bobcat on 10 but I dont seem to be getting nearly enough heat.im running .45 dual shield with mixed gas and Im only trying to weld 1/8the machine is set on wire -positive lead going to the boxground lead going to the work pieceive tried it on wire + and - seemed to do a little better on negative.Seems like I cant get the needed penetration from what Ive read seems like that wire wants 22-26v cant remember the wire speed Im also having issues figuring the wire setting Ive got the box on the low setting and the dial on 60any and all help would be greatly appreciated
发表于 2022-7-3 15:51:53