|
|
Don't ask me a bunch of questions! (Ruark, circa April 2022
)Yes over-clamped, but not enough clamps is not enough clamps.
I bought two, so I can use them side-by-side as a 4 x 6, but when I don't need that much area, I can just use one as a 3 x 4.
1st on WeldingWeb to have a scrolling sig!
Reply:A man can't have too many clamps. At some point in time, there will never be enough.Millermatic 255Dynasty 280 DXReady Welder IHypertherm 30XP
Reply:
Originally Posted by robert-r
A man can't have too many clamps. At some point in time, there will never be enough.
Reply:A woman that my wife knows was getting rid of her recently passed husbands tools.The tools included a JD 650 tractor, with mower and several other attachments.I wanted the tractor,,, BAD!
Her only other offer was $1,000 for everything, I offered her $2,000 .She accepted, besides the tractor, I had to haul out all of his tools, drill press, radial arm saw, planer, and three 10 foot dump trailer loads of hand tools.He had so many clamps,, it was unbelievable. I kept about 30 clamps, and gave everything else to my son-in-law.He must have over 100 clamps, some of them are 6 foot bar clamps.I think it took me 5 solid days of work to haul out all of the tools, cabinets, and some minimal amount of exotic pieces of wood.So, when we pass,, that is what will probably happen to our clamp collections,, they will go with ALL the other "STUFF",,, |
|
发表于 2022-6-16 15:51:52