Has anyone used a raspberry pi to create a pulse module for a tig welder that doesnt have pulse?
Reply:Try chip 555 cost $0.49 each.Dave
Originally Posted by mark_92
Has anyone used a raspberry pi to create a pulse module for a tig welder that doesnt have pulse?
Reply:I just had a pi laying around I was gonna try and use if anyone had any success with it. Cant get a board for my 250dx any more.
Reply:Please post a photos of the board. Dave
Originally Posted by mark_92
I just had a pi laying around I was gonna try and use if anyone had any success with it. Cant get a board for my 250dx any more.
Reply:Search these boards for "JATTUS". He created a pulser for a Miller Diversion, out of something like an arduino. His current version looks quite advanced and professional. In fact if I still had my Syncrowave I would probably buy one for $329. It looks REALLY cool. https://jattus.com/shop/tig-perfectMiller Multimatic 255
Reply:
Originally Posted by smithdoor
Please post a photos of the board. Dave
Reply:Do you have technical data for the input (voltage)Dave
Originally Posted by mark_92
It never came with pulse and being an 03 model, the pulse board is no longer made.
Reply:I do not. I can look and see if I can find an old book for it, maybe it calls somethin out. I doubt there would be anything out there labeling the board components, to have a new board made.
发表于 2022-5-19 11:02:41
