Ranger 250 CT

admin

Good Afternoon All,I am in desperate help. I’m new and trying to get established. I purchased a machine from auction with described blow engine. After sourcing a Kohler ch20s and rebuilding, I got it in machine up and running. now to test operation, and nothing. After further inspection, main pc board missing! So after about a month of daily searching looking for something obsolete, I get a hit and find a used serious (1) board. I get that installed and re test machine with no luck. I have all generator power, no arc. So after looking at some wiring diagrams and speaking with Lincoln they said I needed a jumper on j3 plug on terminals 1/5 for board to know what machine. So on their diagrams it shows j3 as a 6 terminal plug. Well my board is a 8 terminal. So that changes pin out location. I pined 1/5 still as I was advised by Lincoln, but nothing. Is their any other things I could be missing? I’m at a loss and almost out of budget for this unit. Looking for any help! Thanks