whops I posted on someone else's post. Sorry

admin

I am looking and can't seem to find Manuals for this unit I just picked up if anyone can steer me in the proper direction that would be appreciated. Picked up a Airco 300 Amperes DC Super Hornet G-E Welding Generator/Power Plant.  She has a 1.3 Mazda TC engine with 1400 hours on working meter. she's a bit dirty after sitting all these years in a shop,  but everything works on it, the only problem is the water pump is leaking after cleaning carb and all electronics inside case she has a small coolant leak. Runs Great.Basically I am looking for anyone who might have resources for owners manual so when I put or want to order parts on it I can do so to specs. Thanks in advance people.   I am sorry for posting in someone else's post I wasn't sure how to use this site. But thanks Dave for the reply. UB

Attached Images






Reply:That will be 20 lashes with a wet rope for posting on another's thread......

'Jus joking.  That is one interesting welding machine.  Let us know how it welds once you get it operational.
Reply:I have to go look at the engine and see if I can find numbers on block I am not sure what engine it is now seems I can't find it anywhere.   Thanks for the Reply I will let you know how she welds when I get some cables that fit.   I have 5 welders in my shop and none fit this unit,   The person I bought it from, His dad passed away and it was his unit and he couldn't find the cables that went with the machine, the cables I have are either to big or small,  figures lol.  but he said if he can find them he will let me know.  I guess she's been sitting in his back shed for years,  I took and cleaned everything up on her and she fired right up without even choking her.I did fire up the 10 kw generator and she produces power just fine, I want to stick my welding leads from my older miller but there to small, excited to try it though.   Thanks for the Reply shortfuse.  enjoy your day.
Reply:1st link asks and answers your question. I think.2nd link is to millers site where you can find the operator's manuals.https://weldingweb.com/vbb/threads/7...-40-same-thinghttps://www.millerwelds.com/support/manuals-and-parts---Meltedmetal