Sa 250

admin

Hello.  I recently have bought a Lincoln sa 250. Code 9022-h.   The machine will not go to high idle when strike a arc.   It will go to high idle when you use the 120volt outlet and with the toggle switch.   Was wonder if anyone has had this problem before.    Thank you
Reply:

Originally Posted by Repair Man

Hello.  I recently have bought a Lincoln sa 250. Code 9022-h.   The machine will not go to high idle when strike a arc.   It will go to high idle when you use the 120volt outlet and with the toggle switch.   Was wonder if anyone has had this problem before.    Thank you
Reply:The only problem with 120 DC it is DCYou have buy tools that will run on DC.Dave

Originally Posted by Repair Man

Hello.  I recently have bought a Lincoln sa 250. Code 9022-h.   The machine will not go to high idle when strike a arc.   It will go to high idle when you use the 120volt outlet and with the toggle switch.   Was wonder if anyone has had this problem before.    Thank you
Reply:

Originally Posted by smithdoor

The only problem with 120 DC it is DCYou have buy tools that will run on DC.Dave
Reply:Last time I used one was in Port Everglades in 1990 or so. Was diesel.www.urkafarms.com
Reply:That good Most welders at time only had dc and it was a pain.Dave

Originally Posted by 12V71

SA 250s had AC auxiliary power.