|
|
Lance's unboxing video mentions the newer model 200sx comes with a 14 pin, Miller style plug for the foot pedal. I have one of the slightly older models (bought this summer) with the 7 pin connector. The pedal works fine, I just have big feet and have a little trouble manipulating the much smaller pedal.Does anyone make a 7 pin Miller style pedal? Or an adapter pigtail? Or have a wiring diagram so I can make my own?
Reply:I doubt you can plug it in and make it work. I am sure there were software changes that made it work with the 1k pot in the pedal that miller uses. Unless your curent pedal uses a 1k pot but I doubt it does.Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:Hmm...Maybe I'll give SSC a call and see what they can do.
Reply:Nothing, they won't do a pedal with the pot on the side. Maybe sell it and buy a new one? They are on sale.Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer |
|
发表于 2021-9-1 23:19:48