Was using it and just stopped feeding/power output. Contactor won't suck in. Nothing happens when trigger is pulled This happened suddenly. Went to replace fuse and it pops as soon as it is put in with nothing going on. It popped as soon as it was pushed into the holder. I didn't even have time to tighten it. Any ideas? Been a flawless machine up till now since 2001.Esab Migmaster 250Lincoln SA 200Lincoln Ranger 8Smith Oxy Fuel setupEverlast PowerPlasma 80Everlast Power iMIG 160Everlast Power iMIG 205 Everlast Power iMIG 140EEverlast PowerARC 300Everlast PowerARC 140STEverlast PowerTIG 255EXT
Reply:A shorted diode?Lincoln Power MIG 180. Winco 6000 watt generator (13hp Honda)
Reply:Is F1 the fuse that is blowing?ESAB Migmaster 250
Hobart Ironman 230Multimatic 215TWECO Fabricator 181i & 211iHH125EZ - nice little fluxcore only unitMaxstar 150 STH - very nice
Reply:The main fuse on the inside of the cover door.Esab Migmaster 250Lincoln SA 200Lincoln Ranger 8Smith Oxy Fuel setupEverlast PowerPlasma 80Everlast Power iMIG 160Everlast Power iMIG 205 Everlast Power iMIG 140EEverlast PowerARC 300Everlast PowerARC 140STEverlast PowerTIG 255EXT
Reply:In that case, BR1 would probably be a good place to start.ESAB Migmaster 250
Hobart Ironman 230Multimatic 215TWECO Fabricator 181i & 211iHH125EZ - nice little fluxcore only unitMaxstar 150 STH - very nice
发表于 2021-9-1 23:19:37
