Longevity 250ex reviews? can't find any?

admin

I googled the new 250ex and can only find one review back in February stating that theeir was a firmware issue and he had to send it back to the factory. Are these tig machines ready yet? Any reviews?
Reply:

Originally Posted by AluminumWelder

I googled the new 250ex and can only find one review back in February stating that theeir was a firmware issue and he had to send it back to the factory. Are these tig machines ready yet? Any reviews?
Reply:I looked at spread sheet on the web site and don't see any adjustable frequency for welding aluminum with a narrow arcDoes this new welder have this?
Reply:

Originally Posted by AluminumWelder

I looked at spread sheet on the web site and don't see any adjustable frequency for welding aluminum with a narrow arcDoes this new welder have this?
Reply:I heard this unit is finally shipping. How does it compare to the compeitiions everlast 255ex?which is about $900 more. http://www.amazon.com/Everlast-Power...ongevity+250exLast edited by AluminumWelder; 08-16-2014 at 11:56 AM.
Reply:That's going to be a badass welder.Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:Well then hurry up and buy one and post ayou tube review
Reply:

Originally Posted by AluminumWelder

Well then hurry up and buy one and post ayou tube review
Reply:

Originally Posted by AluminumWelder

Well then hurry up and buy one and post ayou tube review
Reply:I have one, but to not sond like i am selling the brand or not it seems to perform just fine! i do not like the torch that comes with it but there are some jobs that the finger control will com in handy if there is anyone in the dallas/denton area that would like to take a look and try it out before you by my door is open. I have some other machines that you can see perform as well
Reply:

Originally Posted by dzljon

I have one, but to not sond like i am selling the brand or not it seems to perform just fine! i do not like the torch that comes with it but there are some jobs that the finger control will com in handy if there is anyone in the dallas/denton area that would like to take a look and try it out before you by my door is open. I have some other machines that you can see perform as well
Reply:Yes I got an HTP torch off ebay for my longevity 160sx, I like it much better than the stock bulky torch, but I learned on a water cooled torch, so all air torches are probably bulky comparatively speaking.
Reply:It's a good machine, what do you all want to know?LONGEVITY 250EX w/ 25' weldcraft cs310 torch

Torchmate w/ Hypertherm powermax 85   withFLASHCUT CNC PRO SERIES CONTROLS
Reply:The new shipment of 250ex models which is set to be back in stock shortly will have a 14 pin style plug that will allow virtually any torch and foot pedal to work on it!  We are taking pre-orders now. The 200sx already has this 14 pin connection.LONGEVITYPhone: 877-566-4462
Reply:

Originally Posted by longevity-inc.com

The new shipment of 250ex models which is set to be back in stock shortly will have a 14 pin style plug that will allow virtually any torch and foot pedal to work on it!  We are taking pre-orders now. The 200sx already has this 14 pin connection.
Reply:Is there going to ba a way to update the older machines?LONGEVITY 250EX w/ 25' weldcraft cs310 torch

Torchmate w/ Hypertherm powermax 85   withFLASHCUT CNC PRO SERIES CONTROLS
Reply:Damn no answers yet!Sent from my iPhone using TapatalkLONGEVITY 250EX w/ 25' weldcraft cs310 torch

Torchmate w/ Hypertherm powermax 85   withFLASHCUT CNC PRO SERIES CONTROLS
Reply:

Originally Posted by jbr

Damn no answers yet!Sent from my iPhone using Tapatalk
Reply:oh my god, the price went up $900 and is now same price as everlast?http://www.longevity-inc.com/tig-welders/tigweld-250-ex$1600 to $2500, damn should of bought it a few months ago, new 14 pin out not worth the increased cost!
Reply:

Originally Posted by AluminumWelder

oh my god, the price went up $900 and is now same price as everlast?http://www.longevity-inc.com/tig-welders/tigweld-250-ex$1600 to $2500, damn should of bought it a few months ago, new 14 pin out not worth the increased cost!
Reply:I did, the price was better but still high. about 33% higher than when it first came out.I understand small price increases, but 33% in half a year?
Reply:It is a damn good machine been using the first gen for 6 months and it has performed very well, it is defiantly a money makerLONGEVITY 250EX w/ 25' weldcraft cs310 torch

Torchmate w/ Hypertherm powermax 85   withFLASHCUT CNC PRO SERIES CONTROLS
Reply:

Originally Posted by AluminumWelder

I did, the price was better but still high. about 33% higher than when it first came out.I understand small price increases, but 33% in half a year?
Reply:Here is my 250ex I use everyday

Attached Images

LONGEVITY 250EX w/ 25' weldcraft cs310 torch

Torchmate w/ Hypertherm powermax 85   withFLASHCUT CNC PRO SERIES CONTROLS
Reply:Here is one for you.www.georgesplasmacuttershop.comPlasma Cutter and Welder Sales and Repairs--Ebay storeTec.Mo. Dealer Consumables for the PT and IPT torch's