I have a Thermal Arc 211 Multi-Process mig welder. I noticed that if I set the voltage.....at say.....22 volts sometimes the welder will show 25 volts or so after welding. Any idea why this is?
Reply:Wonder if the setting is approximate and after welding shows the actual voltage?
Reply:My thermalarc tig does the same thing Sent from my SM-G960U using TapatalkI haven't built anything I can't throw away. Perfection is the journey. Mac
Reply:
Originally Posted by rahtreelimbs
I have a Thermal Arc 211 Multi-Process mig welder. I noticed that if I set the voltage.....at say.....22 volts sometimes the welder will show 25 volts or so after welding. Any idea why this is?
发表于 2021-9-1 23:16:13
