Lincoln 210mp quick spark, won't weld ----issues?

admin

Friend has this machine and said it was working just fine and now it gets a quick spark for a half a second and won't weld. Wire continues to feed, gas continues to flow. Haven't looked at it myself but curious if there were common issues on these.Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:Check the ground... simple but common Sent from my SM-G960U using TapatalkI haven't built anything I can't throw away.  Perfection is the journey.    Mac
Reply:

Originally Posted by Mac's Crew

Check the ground... simple but common Sent from my SM-G960U using Tapatalk
Reply:

Originally Posted by Mac's Crew

Check the ground... simple but common Sent from my SM-G960U using Tapatalk
Reply:

Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:

Originally Posted by Gamble