Does anyone know if a IPM chart has been developed for the ironman230? Most references on calculators are in IPM
Reply:Ok, what if I make a chart as well as voltage tap readings, are there any Ironman230 users that might find this useful information? I’ve been welding for quite a few years, but mig is a new process for me and trying to learn all I can
Reply:I think mig is just like the old stick welders, you just keep adjusting until it welds right. At least with mig you have a chart inside the spool cover door to get you in the ball park.MikeOl' Stonebreaker "Experience is the name everyone gives to their mistakes"Hobart G-213 portableMiller 175 migMiller thunderbolt ac/dc stick Victor O/A setupMakita chop saw
Reply:I have the Miller calculators for stick, tig and mig, yes I understand some fine tuning is always necessary, just like to start off close. When I watch the videos on you tube they always give voltage and inch per minute and would like to replicate the settings at my home, thanks for your input!
发表于 2021-9-1 23:14:58
