Anyone here of this company...

admin

i found it in a hot rod magazine,  i read some comments on there welders and people say there good, but id rather get some advice from you guys heres the link.. htp welderswww.htpweld.com
Reply:I have never used one but havnt heard anything bad about them either, actually most of the news was rather good. But this is all hearsay from me.www.urkafarms.com
Reply:I have the Invertig 201 and Microcut 300 and love both.TiggerAaronHTP Invertig 201w/ CK-20 torch and Bernard ChillerHTP MicroCut 300 plasma cutterLincoln R3S-325 w/ TA 17A Wire FeederVictor Super Range II O/A kitClausing/Colchester 13X40 LatheBridgeport 9X42 Mill
Reply:Don't know about them but I'd just be sure that your local welding supplier can/will work on it if it has a problem. Sending it back to the 'factory' for service would be the pits.I bought 'red' locally just for the peace of mind it gave me. Nothing against 'blue' though. i'd buy their stuff too.
Reply:I have the  invertig 201, and a Microcut 400. I haven't had any problems so far, I'm planning on buying one of thier mig machines next year, I'm waiting to see if they release a mig inverter unit.Rich
Reply:My old man has their MIG200 going on ten years now and loves it.jon rawlinson
Reply:what was the price on the 200?