Hi all,I've got a new concept for a chair i'm working on. It utilises reclaimed stainless steel tube varying in wall thickness from 1mm to 3mm max. I'm hoping I'll be able to weld down the length of the tubes so i can keep the ends clean and weld free. Here's a couple of images just in case I haven't been very clear. Thanks in advance I'd appreciate any response.Hopefully it'll look something like thisLast edited by osianbw; 08-06-2008 at 11:22 AM.
Reply:Your pictures are not displaying.
发表于 2021-9-1 00:50:30