Hello. I have a robotic cell equipped with a Miller Acxess 675 and I would like to achieve some specific requirements for the welding by overwriting with a palm pilot the pick voltage of the power supply to around 50-52V with 2.0-2.1 milliseconds pulse width at a wire feed speed of 600-700 ipm. We use .052 wire with 90Ar+10CO2. I would be interested in different opinions you may have regarding the usage of this high peak voltage and potential problems that may arise during production. Thanks, Jeff.
Reply:I would contact Miller technical support on that one. 1-800-4-A-MillerMM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
发表于 2021-9-1 00:47:29