What do I have here?

admin

I had recently bought a house which also had a garage and in it I found these three migWelders and I'm not very familiar on what they are or what they may be worth.  Any help here?  I have about 20 more pictures or can get over there to get any other information that may be needed.Just trying to figure out what I have!  Thanks all!-CK Attached Images
Reply:It looks like it might be worth me paying the shipping cost for you to send it to me. "SOUTHPAW" A wise person learns from another persons mistakes;A smart person learns from their own mistakes;But, a stupid person.............never learns.
Reply:Need more pictures of them?  What are they worth around?
Reply:Are the machines non-US?
Reply:Looks like a rebadged Airco. Running gear too.Back side view?:Last edited by Stack of Dimes; 07-16-2009 at 06:46 PM.We want to see something like this in the signature line:Lincoln Ranger 250Miller Auto-Darkening Elite HelmetLincoln 100Lincoln MigMiller Spectrum 375Craftsman 8 galllon gas powered compressorLongevity 200amp Tig Welder LT-200D
Reply:I do not know if they are US made of any information other than what is on them.  I'll go get more pictures of all the sides of them and the the components if I can I'm gonna post what I can for now! Attached Images
Reply:i read ----CANOX   on side then on top CANOX  MIGmatic
Reply:made in canada
Reply:Does that bring down the value of them since they are from Canada?
Reply:Originally Posted by prop-doctormade in canada
Reply:Good find.  Canox must just be a Canadian company but I'd say they are then made in the US.  Anyone figure what they are worth or anything from these pictures.  I'm told they work fine.
Reply:Originally Posted by CKlinchock. . . Anyone figure what they are worth or anything from these pictures.  I'm told they work fine.
Reply:That S-22 is a rebadge Miller Feeder.Welder looks like miller also but rebadged.
Reply:Can ox was a canadian company(canadian oxygen) which was gobbled up by linde .the welders are all rebadged millers.All miller parts will also work in these welders.I had a migmatic 200 canox which was a millermatic 200.So you should pack them up and send them all back to Canada with me where they will be happy.  FelonPs they may be three phase so check it outLast edited by Felonyass Monk; 07-16-2009 at 07:35 PM.Caution lurker lives here" hmmm That is serious,pass the ganja and pick up a  24 of MGD"
Reply:I'm told they are 440 amp and how can I tell if they are three phase?  I can ship to Canada you want to buy them?
Reply:looks to me like that's a 460/575v 3 phase industrial machine. That's probably why they were left there at the house.Those are VERY good welders, too bad you don't have the power source to run them.JasonLincoln Idealarc 250 stick/tigThermal Dynamics Cutmaster 52Miller Bobcat 250Torchmate CNC tableThermal Arc Hefty 2Ironworkers Local 720
Reply:Okay next question is how would I sell these and to whom would I do it to?  I can ship anywhere I'm actually in the shipping business so any suggestions there?
Reply:Believe canox turned miller in the 80's, if I heard correct. We got one at work, welds beautiful
Reply:If you'd like, you can go up to User CP and fill in your location.9-11-2001......We Will Never ForgetRetired desk jockey. Hobby weldor with a little training. Craftsman O/A---Flat, Vert, Ovhd, Horz. Miller Syncrowave 250
Reply:The power supply is obviously a re-badged Miller CP302.  Should run on 220-480 3-phase.  The feeder must also be a re-badged Miller.   Those are very heavy duty machines that should last a lifetime.  If you have the power to run it, keep it.  If not, sell it for whatever you can get for it.  I put my CP250TS up for sale without feeder for $200 and somebody bought it sight unseen from 500 miles away.  Sent his relative to come pick it up for him the next day.  I'm thinkin I coulda got 400 for it just as easy.  Oh well, I couldn't use it cause I don't have 3-phase and all I wanted off it was the XR feeder and torch so I got some great stuff for practically free and somebody else got a smokin deal too.  I sold mine on Craig's List.MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:http://shop.ebay.com/?_from=R40&_trk...All-CategoriesSame as a Miller CP-302Ed Conleyhttp://www.screamingbroccoli.com/MM252MM211 (Sold)Passport Plus & Spool gunLincoln SP135 Plus- (Gone to a good home)Klutch 120v Plasma cutterSO 2020 benderBeer in the fridge
Reply:Not sure about what numbers our canox is, but parts from miller 452 swap right into it.
Reply:So if I ask around 300 a piece is that a good price for them then?
Reply:Originally Posted by CKlinchockSo if I ask around 300 a piece is that a good price for them then?
Reply:Hey there thanks for your help and everyone else too!  So you think I can sell the CP 302 for what 300-400?  And the other two are worth about 100 a piece?  I'm willing to sell these to anyone I'm located in the Pittsburgh area and can ship virtually anywhere free of charge as long as I can get what these welders are worth!Hey there thanks for your help and everyone else too!  So you think I can sell the CP 302 for what 300-400?  And the other two are worth about 100 a piece?  I'm willing to sell these to anyone I'm located in the Pittsburgh area and can ship virtually anywhere free of charge as long as I can get what these welders are worth!
Reply:Look at the plug in for the power cord guys.That end plugs into a square-D disconnect switch which indicates to me the machine was more than likely ran on 575v 3 phase power.JasonLincoln Idealarc 250 stick/tigThermal Dynamics Cutmaster 52Miller Bobcat 250Torchmate CNC tableThermal Arc Hefty 2Ironworkers Local 720
Reply:Thanks for all the help everyone!  So around 300 for the one and 100 for the other 2?I'm in the Pittsburgh area if anyone wants them too!