comparible plasma cutter for hobby guy

admin

bought an MM135 little over a year ago, cuz i'm limited to 110V.  love this machine.  it's done everything I've needed.  one prob, I'm finding its the pits to cut plate using airtools, so lookin for a similar plasma cutter, capable of cutting up to 3/16 plate easily.  Any suggestions?  quality is high on my priority list.  what about the machines that do ARC and plasma?
Reply:For 3/16" and 1/4" material a used Hypertherm Powermax 350 (or 380) would fit the bill nicely.The following are examples of cuts made with my PM350 I got at a very good price used.3/16" MS plate.1/4" x 3" x 4" MS tubing.3/8" x 2" MS flat bar.12ga. SS.3/16" aluminum plate.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Hypertherm Powermax 30Hypertherm Powermax 380Miller Spectrum 375 XTremeMiller Spectrum 375Thermal Dynamics Cutmaster 38All good machines and all capable of what you require.MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op