help - compact bender!!

admin

Hi everybody – I need some helpIt´s 2:30 AM here and I am running out of fuel, so please be kind.Being things the way they are, the guy that had to make some parts for a job said that because of thunder and lightning bolts and possibly the rotation of earth, bla bla, will not deliver on time, ha! and now the problem is mine, ha! I need a bender (compact or bench type) like the one from HF, but I am in the middle of nowhere and I will have to make one. Will be bending 1 ¼ x 3/16, 2 x 1/8, 1 x 1/4, 3/8 and ½ round HR.I have very little time, many things to do and no one of the helping hands is doing any help at all. So imagine.Any sort of diagram or drawings will do it. Thanks.PS. What´s happening with people, they complain of no job, and then play primadonnas!? Didn´t use to be like that around here.
Reply:I am pretty sure there are plans for one somewhere on the metalworking dropbox- but you may have to go back into the retired plans.http://www.metalworking.com/dropbox/
Reply:I don't think the H.F. is gonna do 2".... 1¾" is about the max without a bindjohn