Saturday job with a twist

admin

got a call on Friday nite from a welding company in the next town on from me I have been working with them on weekends for 15yrs now the local servo (petrol/gas station)had a breakin the nite before and their safe had been wrecked the cops caught the guy in the act first time for years in this little townthere was a fight early in the morning and at the same time this di&khead was trying to rob the servo cops were across the road tending to the fight when they heard him one of them walked across to see what the noise was end result one badman going to the big house anyway heres what I had to fix today we removed the old sheets and replaced them with lyten 3mm in side and out lyten is a hi tensile sheet and weld it with er80s mig wire we were told the safe is at least 80yrs old here is the preps tool of choice how far he got before getting caught we cut the outside wall and inside wall out and replace them as well as welding sheets on all sides that could be acessed fully weld the inter wall at the back of it them fully welded all other sheets we fittedCreative metal Creative metal Facebook
Reply:wile not the best choice of tools it did apear to be getting the job done i guess the cops are in the right place onec in a wile.i was riding with several frends on time in florida and the hole pack of us got pulled over, cops just wanted to check id's and licences. i guess we didnt look like the most leagle bunch, ok so maybee there were a few licence infractions involved but any way, wile we were all pulled over in the big strip mall parking lot at ablut 1AM, about 20 bikers and soon about 5 or 6 cop cars with the hole freeking naiborhood light up from there lights. and low and behold some fools tryed robbing the liqure stoor in the same parking lot needless to say all the cops went rushing over there and quickly scooped up the bad guys and we all just kinda road off without waiting to see if they were going to come back. good timing for us and the cops, not so good for the crooks. you gotta be a fool to hold up a store with a hand full of cops in the parking lot, but no one ever acused crooks of being the smartest bunch of fellas.i guess it was a bit funnyer having ben there than when told, but it was a good night. nice repair by the way. kind of funny your saterday is already a job dune and its still 6AM here, havent even got any good cartoons on yet. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:there was a fight early in the morning and at the same time this di&khead was trying to rob the servo cops were across the road tending to the fight when they heard him
Reply:na he was using that big old pick axe. if he had been using a chisel odds are he would not have been herd. summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.
Reply:Nice fix Neil..Looks like we have a candidate for "dumb crook of the month" now dont we?  ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:dumb crook should of use the power of blue like me;http://www.weldingweb.com/vbb/showthread.php?t=7387