new pics of my truck

admin

Here is the truck laying with my new control armAnd here it is extended.pics of my cantilever arms for the bags.Strive For Perfection
Reply:Nice work Brooks.Where did you learn to fabricate?- Paulhttp://all-a-cart.comWelding Cart Kits and accessories
Reply:I taught my self ...I think it comes from my drawing back ground in school I like to think that i have a good eye for artistic stuff. I don't really draw anymore ever seen i became a welder/fab. about 7yrs. agoStrive For Perfection
Reply:I like to own my own shop like you some day....................soon hate working for other people...Strive For Perfection
Reply:Right on. I'm self taught as well and used to have a background in art.You definitely taught yourself well.http://all-a-cart.comWelding Cart Kits and accessories
Reply:Originally Posted by BrooksI like to own my own shop like you some day....................soon hate working for other people...
Reply:here is pics of the rear end but I'm redoing it. I want to use mandrel bent 2+4 square tubing rail but i can't find a good web site that has verity. ITS A  1996 LEXAS LS 400 REAR ENDStrive For Perfection
Reply:What type of bends are you looking for Brooks?2"x4" bent the hard or easy way?Standard style rear fram rails or custom dimensions?http://all-a-cart.comWelding Cart Kits and accessories
Reply:Here's a link to Chris Alston's Chassisworks.I've used a good amount of their products. They are really helpful.If you don't see what you're looking for you might try and call them and see if they'll make you what you want.Chris Alston ChassisworksNote: You have to look in the "E-Store" to view their products. For frame rails, look under "Clips, Weld-in, Back half"- Paulhttp://all-a-cart.comWelding Cart Kits and accessories
Reply:hard way...custom dimensions.... Haven't drawn it up yet. I'm starting on it once i finish the front lower control armsStrive For Perfection
Reply:thanks.....and thanks for the complement you do damn good work tooStrive For Perfection
Reply:Thanks.If you're ever in Southern California, feel free to come by my shop and check it out.I'm about 3 miles away from the L.A. County Pomona Fairplex Dragstrip.Then you can show me how to weld Titanium!!- Paulhttp://all-a-cart.comWelding Cart Kits and accessories
Reply:Nice looking work, wish I could get my truck down a little more I hate the Ford I-beams.  And I'm to cheap to buy drop beams DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:Sounds good Paul, next time I go to Cali. I'll be there.......Strive For Perfection
Reply:Yea, (ford I-beams) thats all I have to say........J/kStrive For Perfection
Reply:Looks good. Hope you don't have a dirt driveway- you truck looks a little low. I remember when I lived on the farm and bought a lowered truck. I had to park it out by the road on the canal for the first 4 days until I could re-grade the driveway, With the potholes I could not even drive it to the house. It was not the best fit, with 4 bales of hay it was scraping everything- it needed air bags bad.
Reply:That why I have air bags on my truck. When I lived with my parent I had to drive down a dirt road every day with a custom speed bump that some  douchebag made because He rather have his kids play in the street rather then the back yard oh did i mention all the lots were on a acre and a quarter...Last edited by BuiltByBrooks; 01-02-2007 at 09:19 PM.Strive For Perfection
Reply:you do good stuff  you also need a better camera... ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by zapsteryou do good stuff  you also need a better camera... ...zap!
Reply:Yea I've been using my phone to take pics sorry......I bought a new house a couple months ago so I'm still recovering..Strive For Perfection