a few pics of some gates I previously did!

admin

Zap these should change your mind about my jail bait gates!  besides the one with 1" pickets.details: hammered 1" 16 ga. center cross section, 1.5" 16 ga frame and posts,store bought scrolls (yes i know.... but I dont have a scroll bender and this was a job for the company I work for not a side job)  the picture looks crooked cause I was holding my phone sideways when I snapped it.1.5" 16 ga frame and 24 gauge sheet metal1.5" frame 1" pickets 24 ga plate, insta rust sealed with clear accrylic sealer
Reply:Nice job mr2!!Did you rivet the sheet metal to the gate?I'm doing some gates right now and will be using 18ga perforated and was thinking of riveting the sheet to the backside of the gate after it was all powder coated.- Paulhttp://all-a-cart.comWelding Cart Kits and accessories
Reply:Good stuff!...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:No rivets here... I used 10 x 1"  (5/16 driver) self tapping screws.  but rivets may not be a bad idea and may look pretty good.
Reply:looks good...what area is that in the second pic? looks like nice homes there...Strive For Perfection
Reply:The second pic??  The first pic and the third pic are custom homes and are in two very ritzy parts of town.  Tucson, AZ
Reply:Yeah thats a nice job! weld it like you own it