Excavztor dead arm bracket....

admin

Here is a dead arm bracket for a Komatsu PC400....Process, MIG.... dual shieldWire, 1/16" Hobart Excelarc 71Gas, 75/25OVC, 32Wire speed, 300 IPMPlates cut and all tacked up.....Completed.........Thanks for looking........ _________________Chris
Reply:Nice!Real world weldin.  When I grow up I want to be a tig weldor.
Reply:Wow. looks great Chris.Maybe their is something to be had from Zaps favorit saying " You get all the fun jobs " Miller DVI2Lincoln Precision Tig 225Thermodynamics Cutmaster 38Everything else needed.
Reply:Originally Posted by jamlitWow. looks great Chris.Maybe their is something to be had from Zaps favorit saying " You get all the fun jobs "
Reply:Gawd zap, so what have you been doing?  Looks excellent lorenzo, like how you used the square pipe to keep things square.  good idea.Various GrindersVictor Journeyman torch200cf Acet. 250cf oxygenLincoln 175 plus/alpha2 gunLincoln v205t tigLincoln 350mpEsab 650 plasmaWhen you can get up in the morning, Its a good day.Live each day like its your last.
Reply:Beautiful!!Just let 'em try rip this in two!
Reply:Gawd zap, so what have you been doing?
Reply:Nice stuff - I too like the square tube to keep things square and on da' level.John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Doesnt that thing behind the bracket in the first pic look like a toilet bowl..Various GrindersVictor Journeyman torch200cf Acet. 250cf oxygenLincoln 175 plus/alpha2 gunLincoln v205t tigLincoln 350mpEsab 650 plasmaWhen you can get up in the morning, Its a good day.Live each day like its your last.
Reply:Sure does but it's not.... pump housing.... LOL  That's one expensive bowl!!!!_________________Chris
Reply:hey chris, what settings are you spraying at?ZAP, i don't care if you tied to stuff wog into the positioner and make him sick spinning him around, as long as your getting paid."Retreat hell, were just fighting in the other direction"Miller Trailblazer 302, Extreme 12 VS, Dimension 400, Spectrum 375, HF 251D-1, Milermatic 251 w/ spoolgun  Hypertherm 1000Lincoln sp 1702000 F-450 to haul it
Reply:Sick Chris-What's the thickness of the substrate?  Did you cut the pieces ? If so, nice work. -Graham-Mechanical EngineerAutosport Mechanic/Fabricator
Reply:I always get a small notch/undercut on the corner returns.  Inspectors always snag it.  As a result I break all my corners before welding.  I end up having to do it anyway to prevent paint film thinning on the corners and the accidental undercut is eliminated.
Reply:Keep up the good work Bud!
Reply:Great job Lorenzo! Old Zap wishes he could throw down beads like that!I think he would rather just throw down lip and tell everyone else what to do. He must be a boss somewhere in an office.
Reply:You do realise your not making any friends here.. ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:I have been reading this message board for a long time. I don't think you are good enough to give anyone advice. Most of the welds you rag on are much better than yours. I do not have time to post pictures. I weld gas piping for the semiconductor industry. If my weld fail , people die.
Reply:Jealousy is the first form of flattery. Your snide remarks towards Zap will not be taken lightly here. He contributes much to this forum and is well respected by many senior and junior members. Just because you don't like how or what he posts does NOT give you the right to discredit him. Take is another place or keep your comments to yourself.John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Great! You guy's should get a room together somewhere and weld the crack of dawn!
Reply:Looks like you like to pick on moderators also.. Wrong move my friend..We have ways of dealing with people like you..You'll see soon enough..Bye bye!!...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Bye bye  !   Bye bye!John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Originally Posted by TIGMASTER9000Great! You guy's should get a room together somewhere and weld the crack of dawn!
Reply:This thread will remain locked until a certain issue can be dealt with. Sorry for the inconvenience.- Paulhttp://all-a-cart.comWelding Cart Kits and accessories