|
|
More Excavator arm repair..1..Bore..2..Sleeve..3..Add bushings..4..Weld..Thats the steps..I just did the welding on this one..Here's the arm...Heres the groove..All I was told was "keep the weld in the groove and dont make a mess out of it"..Yeahhhhh whatever...I think it will pass.. Next post.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:More..Here's the set up..Yeah I know..I changed it to a gas lenz.. 1/16 Red...100 amps...045 70S-2..And a steady hand...I get all the fun jobs... ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Amazing work yet again.
Reply:i just want to sop that up with some bread....looks delicious, zap
Reply:Nice control. Was the inside edge getting a little thin in one area you hid under the dime? Just nit picking for fun Very nice.
Reply:where is the dime in the first picture??? "Ask not for whom the bone bones, it bones for thee" - Bender
Reply:oh never mind, i found it. you do get all the fun jobs. "Ask not for whom the bone bones, it bones for thee" - Bender
Reply:Originally Posted by pulserNice control. Was the inside edge getting a little thin in one area you hid under the dime? Just nit picking for fun Very nice.
Reply:I think that passes for "not making a mess of it". John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:Originally Posted by MicroZoneI think that passes for "not making a mess of it".
Reply:Yes sir...but you made a mess of my 24ga. aluminum! Oh, that was fun!John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:Let's see your ceiling crane!
Reply:Originally Posted by MAC702Let's see your ceiling crane!
Reply:Nice job zapster. Professional as always!!- Paulhttp://all-a-cart.comWelding Cart Kits and accessories
Reply:ZAP, textbook welds as always, but why sleeve instead of lineboring and welding. just wondering, we always weld and then bore ours. also, why were the bearings installed before the welding is complete."Retreat hell, were just fighting in the other direction"Miller Trailblazer 302, Extreme 12 VS, Dimension 400, Spectrum 375, HF 251D-1, Milermatic 251 w/ spoolgun Hypertherm 1000Lincoln sp 1702000 F-450 to haul it
Reply:Originally Posted by backuprollerZAP, textbook welds as always, but why sleeve instead of lineboring and welding. just wondering, we always weld and then bore ours. also, why were the bearings installed before the welding is complete.
Reply:Looks real good. Very impressed.
Reply:So that was bored after you finished welding the tiny bead around the perimeter??
Reply:Originally Posted by SandySo that was bored after you finished welding the tiny bead around the perimeter??
Reply:Looks like the welding was just sleeve security,is that correct?
Reply:Originally Posted by lars66Looks like the welding was just sleeve security,is that correct?
Reply:Yes. I know how hard it is to convince people just how permanent a shrink fit is.
Reply:Originally Posted by lars66Yes. I know how hard it is to convince people just how permanent a shrink fit is. |
|
发表于 2021-9-1 00:30:18