More pics, gas turbine project

admin

Decided I'd start a new thread with the new pics. Hope you guys dont mind looking. Got the manifold fabbed thanks to zap. Manifold welded to combustion chamber, turbo mounted, started on the intake. Its tough to cut good miters with a hacksaw, but its done, tacked. When Im all finished with mockup I will media blast the whole thing and paint with headder paint.Last edited by MicroZone; 07-16-2007 at 05:23 PM. You only need to be 2% smarter than what you are working on.Lincoln pm140hacksawa big hammer
Reply:Looki'n good... Glad everything worked out for ya!...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:i can't wait to see this thing in action. "Ask not for whom the bone bones, it bones for thee" - Bender
Reply:Cool ! What are you going to use to couple the aluminized 2'' piping to the compressor outlet?John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:Micro, thanks for fixing the pics again. I couldn't find the "paperclip". It takes a series of seven miracles for me to get the pics posted as it is. I know nothing about computers. The aluminized pipe will be clamped with a rubber fitting and two small band clamps. The pipe fits so tight as it is that I may just use a band clamp alone. You only need to be 2% smarter than what you are working on.Lincoln pm140hacksawa big hammer
Reply:Looks good but I have one question. What is this thing going to do.
Reply:Originally Posted by 737mechanicLooks good but I have one question. What is this thing going to do.
Reply:Good stuff !  John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:yeahhh gott see it working!keep the pics comming!My Babies: HF Drill pressHF Pipe Bender3   4.5" Black and Decker angle grindersLincoln Electric PROMIG 175that´s it!
Reply:Originally Posted by MB2005I'm gunna mount it on a old lady 3 wheel bike. I want to ride it down the interstate in a batman suit at three in the morning. Just so I can hear the dispatch tape of the officer calling that one in.  "Kshk, Im in pursuit of batman on a pink rocket bike, over"
Reply:Looks good. No pics of the flameholder inside the combustion can??Miller EconotigCutmaster 38Yes ma'am, that IS a screwdriver in my pocket!
Reply:Originally Posted by Joe HLooks good. No pics of the flameholder inside the combustion can??
Reply:Make sure you post a pic and maybe a sound clip of it running, I would be real interested to see it in action.