a few job specific lifts I built this summer.

admin

This was actually built for a set of steps I built early this year.  It was too short for the spiral, but I worked with it. This was to lift the get the rail to the window.  That is a HF winch.This was made to lift a Valet cabinet I built.  I had to replace the wheels on the cabinet for a third time.  It need2 some improvements.  It is heavy and I need to move it off to the side of the truck.  The brake winch is from Northern Tools, cylinder came from a transmission jack.  Last edited by tapwelder; 11-17-2007 at 06:52 PM.
Reply:Pretty slick stuff Tapwelder.DavidReal world weldin.  When I grow up I want to be a tig weldor.