|
|
I have a thermal arc fabricator 130 that has been sitting in my garage for years not being used. so i decided to give it to my uncles grandson and teach him how to weld. but i found out it needs a new liner since it wont feed the wire and the rollers are turning. my lws either cant get one or doesnt want to get one. can anyone tell me about an online store to get parts for this machine. thanks.
Reply:Maybe check with these guys, they usually supply many different components for a variety of equipment. Good luck!http://www.htpweld.com/A few of my toys !LinuxMintManjaroMiller Roughneck 2E Lincoln WeldPak 100HTP MTS 160 Chicago Electric 80amp Inverter Victor O/A
Reply:It uses tweco parts, here is a link to the manual;http://www.thermadyne.com/IM_Uploads...430429_473.pdfIf my airgas or praxair LWS did that to me I'd use the next link in the chain... bet it wouldn't happen again.Matt |
|
发表于 2021-9-1 00:25:39