|
|
I had to repalce the pintle plate on my buddys 10 wheeler. The old one was a mes all bent, and the holes for the bolts were ovaled out. http://i94.photobucket.com/albums/l1...tleHook013.jpghttp://i94.photobucket.com/albums/l1...tleHook005.jpgI cut the offending portion out, and made a new piece from 3/4" plate.Fully beveled it and welded it in with a back bar, behind the joint. http://i94.photobucket.com/albums/l1...tleHook004.jpgAll layed out for holes. http://i94.photobucket.com/albums/l1...tleHook006.jpgI love my mag drill.http://i94.photobucket.com/albums/l1...tleHook007.jpgFits like a golve, almost like I know how to measure. http://i94.photobucket.com/albums/l1...tleHook008.jpgTime to cut the center hole with my handy dandy circle cutter. http://i94.photobucket.com/albums/l1...tleHook009.jpghttp://i94.photobucket.com/albums/l1...tleHook010.jpgWorks like a charm.http://i94.photobucket.com/albums/l1...tleHook011.jpgLike it grew on the truck itself, I know the passenger D ring is off.http://i94.photobucket.com/albums/l1...tleHook012.jpgAll done, ready to move a Cat 315 in the morning.http://i94.photobucket.com/albums/l1...tleHook014.jpgIt also has gussets to the frame in the back.Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:I love your drill too!David Real world weldin. When I grow up I want to be a tig weldor.
Reply:Ya that is slick!Me!
Reply:I like that drill x3Last edited by Steelwill; 10-07-2007 at 06:19 PM.Will Supports Autism Awareness My ToysBobCat 225 PLusMillermatic 130Miller Spectrum 300 CutmateEverlast Power Tig 185 Micro April is Autism Month .
Reply:And you disconnected the batteries right??...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Yeah, yeah, the batteries The only piece of electronic equipment on that truck is the radio. It has an old 3208 Cat motor that is on it's 9th life, I wasnt to woried about it.Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:Nice Job !!Anything worth doing is worth doing RIGHT
Reply:well doneChuckASME Pressure Vessel welder
Reply:Alrighty, welding in the dirt. ..Good work.
Reply:Nice work, nice toys.
Reply:I don't want to ruffle any feathers, but... Have we ever heard of stringers. My instructor would have had a cow if I weaved a pass that wide. Very prone to weld cracking.
Reply:Nice job. The tutorial with pics is what makes this site great. I love to watch the whole process involved and not just the end results. Thanks for taking the time to document the job and you can send that mag drill to Lakewood, CA. now that you're done with it. Hobart 140 Handler w/ gasHyperTherm Powermax 380 Plasmaoxy/acetylene
Reply:tozz will the DOT give you crap for only doing part of the plate and not the whole thing that's what I heard. The truck team in my area are baaaaaad!!!
Reply:"Have we ever heard of stringers."Please explain to a new guy: What are stringers?Thank you, Chief
Reply:mag drills are the stuff, make short work of hardned truck framesHave we all gone mad?
Reply:There are stringers under the weave, I just like to cap with a weave it is my thing. Infro, I don't know if the DOT likes it or not, but thats what the customer wanted. If it was up to me there would have been a new plate made up, but the truck is on it's last legs.Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:Originally Posted by sn0border88mag drills are the stuff, make short work of hardned truck frames
Reply:fine job tozzi!!!
Reply:Every one likes the drill, sure it is nice. I can't beleive no one mentioned my handy dandy hole cutter for the torchDisclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:the drill was shinyHave we all gone mad?
Reply:Originally Posted by TozziWeldingThere are stringers under the weave, I just like to cap with a weave it is my thing. Infro, I don't know if the DOT likes it or not, but thats what the customer wanted. If it was up to me there would have been a new plate made up, but the truck is on it's last legs.
Reply:!!!!!WOW!!!!!! nice circle cutter!!!the day you stop learning in this tradeis the day your in your grave
Reply:Tozzi, what happened to the pictures, I just went back on the Trailer hitch thread to look at that neat little circle cutter and the pictures won't load.
Reply:The circle cutter definitely caught my eye. I may need to make one.
Reply:Thanks for the pictures. I'm going to make one tomorrow.Pics are fine today, I think Photo Bucket was down.Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:Excellent work, always impressive to see your tools and improvised tools that work flawlessly! John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:Just wondering what the brand/source is on the drill. I may have to buy myself a birthday present.The circle guide is slick too. Looks like it would be much better than mine for small holes.
Reply:The drill is a Jancy Slugger.Disclaimer; "I am just an a$$hole welder, don't take it personally ."
Reply:Nice job man, and I also loked the cirlce cutter, but I was wondering about that drill.......can you put morse taper drills in it or is the chuck bolted to it.I have been trying to find a nice Mag drill I can use with morse tapers
Reply:You can buy a 3/4" chuck for it. It takes Weldon shank annular cutters.Disclaimer; "I am just an a$$hole welder, don't take it personally ." |
|
发表于 2021-9-1 00:24:04