|
|
These are the shanks I welded on a bunch of buckets yesterday and today. My son ground off all the paint and was in charge of the bobcat. I used some dualshield and mostly pulsed spray mig with .045 wire @ 250 ipm, 98/2 argon/Co2.This is the gap at the top of the tooth. English and Metric Those shanks are ground on the bevel.I put a little butter on one side. The edg of this will be the edge of my second passSecond passLast edited by David R; 01-13-2008 at 07:12 PM.Real world weldin. When I grow up I want to be a tig weldor.
Reply:Long whip, about an inch in the grove.This is what I replaced. I love this job!Top sideEight hours of work for my son and I. We did 14 buckets.Bottom side of the toothReal world weldin. When I grow up I want to be a tig weldor.
Reply:It's Sunday!!You're supposed to be watching Football!!!! ...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:I'm self employed. DavidReal world weldin. When I grow up I want to be a tig weldor.
Reply:nice workChuckASME Pressure Vessel welder
Reply:Nice work, I hope the owner doesn't want those to come off. How old is your boy?
Reply:Eight hours of work for my son and I. We did 14 buckets.
Reply:Nice production! Line 'em up, knock 'em down.City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Bucket Bonanza!May David R's fine dentures, make many miserable hours of tough digging, fly by! "Grandmother, what big teeth you have!"
Reply:nice job ,did the shop get warmed up with all that heat?Life is tuff,so be sharp lincoln sp 100 cutmaster101 miller bobcat miller 250 mig $thousands in snapon
Reply:Originally Posted by asemasternice job ,did the shop get warmed up with all that heat? |
|