stainless tig

admin

ok so 3/16 stainless.one weld straight. other walk the cup.here what i used:Joint set up:fused tack:6G zirconium 702 GTAW 2" xxheavy6G P.E.D. carbon steel GTAW 2" xxheavy3G titanium Gr. 2 - Gr. 7 GTAW up to 3/4" 3G 316L stainless GTAW up to 1" 3G carbon steel GTAW up to 1" 3G Hastalloy GTAW up to 3/4"1G tantalum GTAW up to .060"
Reply:bead:walk the cup:6G zirconium 702 GTAW 2" xxheavy6G P.E.D. carbon steel GTAW 2" xxheavy3G titanium Gr. 2 - Gr. 7 GTAW up to 3/4" 3G 316L stainless GTAW up to 1" 3G carbon steel GTAW up to 1" 3G Hastalloy GTAW up to 3/4"1G tantalum GTAW up to .060"
Reply:Good looking welds, hope  you are not going to ask for help.   JohnSMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFCand Shielding Gases.  There all here. :
Reply:Watch the undercut!  "I'm watching, I'm watching!" City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Cool.Lincoln Power Mig 210MP MIGLincoln Power Mig 350MP - MIG and Push-PullLincoln TIG 300-300Lincoln Hobby-Weld 110v  Thanks JLAMESCK TIG TORCH, gas diffuser, pyrex cupThermal Dynamics Cutmaster 101My brain
Reply:Looks pretty good, but if you used more amperage, your freehand bead would be much smoother with the same exact timing and movements...and your walking start would be smoother too.
Reply:Did you get permission from Zap to use his patented "Dime-ometer" ?
Reply:nice weld .the  "Dime-ometer" is available from Zap-co for $19.95 and if you order nowyou get two  "Dime-ometer" for the same low price thats right not 1  "Dime-ometer"  but 2 for the low low price of just $19.95 +tax and shipping soorder now    ChuckASME Pressure Vessel welder